• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

It is important to clean and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace and generally fit into frames that were previously in use very easily. If windows with double glazing repair panes are joined by internal beading, it will be harder to remove and replace the old panes. In this situation you'll need to source some plastic spacers that will aid the new pane in being able to fit properly into the frame of the window.

If you plan attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric and not on the floor, where they could be trampled.

It's a great idea cover the gap with tape after the glass has been removed. This will keep water and drafts from entering your property until a professional arrives to fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is large, you may want to consider using a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can develop a number of problems that include sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. It is crucial to act as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sliding. To do this, you'll have to open the window to get to the frame. With an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and test it for fit. If you are happy with the fit of your window, you can tighten screws to hold them in place.

If you are unable to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also become loose. Most often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to shut the window and perform an experiment fitting. The corners of the sash must be aligned with the casing joint. If it doesn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is important to take action if you wake up every morning to find a smoky wall and floors that are wet. Water leaks from windows are not just a cause for destruction of your home's structure but also undermine your efforts to control the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on how serious the issue is, the old caulking may have to be removed. When it comes to uPVC repair, you should avoid 'over-caulking'. This will make your window harder to clean and lower its energy efficiency.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it opens with an ease. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical part, hinges can wear out over time. It is very easy to change the hinges on a window, but it's easier if someone else helps you to hold the frame.

Check that the uPVC hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue can be caused due to opening the window in the wrong way or by a poor installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to provide advice.

It is also crucial to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. Firstly the hinges, uPVC repair again because of wear and tear, could become misaligned. This causes an opening to appear between the sash and the frame. This can be easily repaired by giving them good cleaning, but if they are beyond repair it might be necessary to get them aligned or replaced. The interlock may be unbalanced. It is located on the hinge's side, and might require to be cleaned. In some cases it is possible to replace the hinges.

The seals may wear out or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also reduce the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They will help keep cold air out and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it is more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your upvc window you should consult a professional immediately.